Operations
Please note — this platform is best used in Google Chrome.
HR
Maximizes the value of human capital and aligns it with company initiatives, values, strategies and the needs of all stakeholders.
Accounting
Resourceful, innovative and service oriented to the financial needs of all departments of the JNE Group.
Health & Safety
Promoting the Health and Safety of all employees by providing a safe and healthy work environment.
IT
Passionate about providing staff and visitors with the best possible IT services, products and support.
Quality
Fosters quality culture by developing quality awareness through the organization and encourages every employee to be an active part of JNE’s continual improvement.
Designer Focus
Career Path Graphic — Designer
Level 1
Responsibilities
- Assist with CAD work as required.
- Assist in planning of drawing content/details in accordance with JNE standards.
- Actively seeks feedback and learning opportunities from others.
- Assist with drawing checking in accordance with JNE standards.
- Assist others in defining scope of work.
EducationÂ
- High school diploma required.
- College diploma preferred.
Experience
0–3 years
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 2
Responsibilities
- Complete CAD work as required.
- Planning of drawing content/details in accordance with JNE standards.
- Actively seeks feedback and learning opportunities from others.
- Complete drawing checking in accordance with JNE standards.
- Define scope of work in co-operation with engineers.
EducationÂ
- High school diploma required.
- College diploma preferred.
Experience
3–5 years
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 3
Responsibilities
- Complete CAD work as required.
- Planning of drawing content/details in accordance with JNE standards.
- Actively seeks feedback and learning opportunities from others.
- Complete drawing checking in accordance with JNE standards.
- Define scope of work in co-operation with engineers.
EducationÂ
- High school diploma required.
- College diploma preferred.
Experience
5–8 years
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 4
Responsibilities
- Assist in the analysis of project requirements.
- Complete CAD work as required.
- Prepare final drawings in accordance with JNE standards.
- Assist in guidance and training of junior designers.
- Complete drawing checking in accordance with JNE standards.
- Define scope of work in cooperation with engineers.
EducationÂ
- High school diploma required.
- College diploma preferred.
Experience
8–10 years
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 5
Responsibilities
- Analyze project requirements.
- Responsible for all drawings issued.
- Prepare final drawings in accordance with JNE standards.
- Guidance and training of junior designers.
- Complete drawing checking in accordance with JNE standards.
- Define scope of work in cooperation with engineers.
EducationÂ
- High school diploma required.
- College diploma preferred.
Experience
10+ years
Criteria to advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Engineer Focus
Career Path Graphic — Engineer
Level 1
Responsibilities
- Review and understand project requirements, flow sheets, and design layouts.
- Routine checking on design calculations and drawings.
- Develop routine installation and routing details.
- Perform routine CAD work.
- Actively seek feedback and learning opportunities from others.
EducationÂ
- Engineering Degree, University Level (College — USA).
- Registered EIT.
Experience
0–4 years
Criteria to Advance
- Meet responsibilities, education, and experience requirements.
- Advance on availability of next level.
Level 2
Responsibilities
- Analyze project requirements and develop/review flow sheets and design layouts with assistance.
- Check all design calculations and drawings with assistance.
- Develop installation and routing details and prepare final drawings with assistance.
- Supervise CAD work of operators and designers with assistance.
- Stamp drawings as required under the approval of a Int./Sr. Engineer or qualified PM (where applicable P.Eng Status exists).
EducationÂ
- Engineering Degree, University Level (College – USA).
- Registered EIT.
Experience
4–6 years
Criteria to advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 3
Responsibilities
- Analyze project requirements and develop/review flow sheets and design layouts with assistance as necessary.
- Execution of design with assistance as necessary.
- Develop installation and routing details and prepare final drawings with assistance as necessary.
- Supervise CAD work of operators and designers as required.
- Stamp drawings as required by legislation, standardization, policy or customer requirement.
EducationÂ
- Engineering Degree, University Level (College – USA).
- P.Eng required (Canada).
Experience
6–9 years
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 4
Responsibilities
- Determine and reviews the flow sheet and/or design layouts , coordinate general approach.
- Execution of design in the role of Jr. PM or Jr. Lead.
- Select routing details and final drawings.
- Supervise work of Jr. Engineers, Designers and work team.
- Review critical design calculations and stamp drawings as required by legislation, standardization, policy or customer.
EducationÂ
- Engineering Degree, University Level (College – USA).
- P.Eng required (Canada).
Experience
- 9–11 years
- Multi-discipline engineering knowledge an asset.
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Level 5
Responsibilities
- Develop the flow sheet and/or design layouts , coordinate general approach.
- Execution of design in the role of Int. PM or Int. Lead.
- Approve routing details and final drawings.
- Supervise work of Jr. Engineers, Designers and work team.
- Review critical design calculations and stamp drawings as required by legislation, standardization, policy or customer.
EducationÂ
- Engineering Degree, University Level (College – USA).
- P.Eng required (Canada).
Experience
- 11+ years
- Multi-discipline engineering knowledge an asset.
Criteria to Advance
- Meet responsibilities, education and experience requirements.
- Advance on availability of next level.
Additional focus
This is where the additional focus information can be displayed.
Career Path — Designer
