About Nigel Cruz

This author has not yet filled in any details.
So far Nigel Cruz has created 78 blog entries.

Pilot Plant Automation and Upgrades

Continuously looking to improve our products, we identified an opportunity to automate our wastewater treatment pilot plant, reducing the required labour to maintain efficient operation. We also installed mixed reaction tanks below the existing plug flow reactor and made the various chemical reaction systems selectable via a tee branch system.

Pilot Plant Automation and Upgrades2021-05-05T19:20:27+00:00

Solving Excess Wastewater Problem for Greenhouses

Greenhouse growers may run out of holding capacity for rainwater during the Spring and Fall rainy seasons. Because this rainwater and plant run-off contacts rooftops, floors, plants, etc., it often has pollutant levels surpassing provincial limits for discharge to the natural environment. By reversing a standard wastewater treatment process, JNE’s pilot plant can safely discharge excess water run-off while recycling and storing nutrient-rich water for production use.

Solving Excess Wastewater Problem for Greenhouses2023-04-24T15:51:36+00:00

Wastewater Treatment: Drilling, Tunneling, and Mud Separation Polymers

Modern day mining, tunneling, jet and pressure grouting, drilling, and similar activities require a lot of water for operation. These industries use water to remove ground material, cool and lubricate machinery, and control dust. This contaminated water cannot go back into the ground as it may bring these pollutants directly into other important underground water sources such as aquifers and water tables. Luckily, JNE Environmental has the solution.

Wastewater Treatment: Drilling, Tunneling, and Mud Separation Polymers2021-05-05T19:24:06+00:00

Wastewater success for skin care and beauty products manufacturer

Wastewater from skin care and beauty products manufacturing can be very difficult to treat due to the complex ingredients used. When JNE Environmental was approached to perform testing on wastewater from a cosmetics manufacturer, we were excited to see how we could treat all levels to within sewer by-law compliance limits.

Wastewater success for skin care and beauty products manufacturer2021-05-05T19:28:09+00:00

Foam Suppression System for Soap Manufacturer

A soap manufacturer in the Toronto area had issues with excessive foaming in production areas, wastewater tanks, and sewer systems on their property. They were consuming significant volumes of de-foaming chemicals and still encountering issues. They turned to JNE Environmental for a plant assessment and solution.

Foam Suppression System for Soap Manufacturer2021-05-05T19:34:16+00:00

Achieving Sewer Compliance through pH Correction

A beverage manufacturer in the Toronto area was facing notices of violation from their municipality stating their wastewater pH was too acidic and out of compliance. Their existing treatment system was being overloaded with high flow rates and could no longer keep up. That is when they turned to JNE Environmental for assistance.

Achieving Sewer Compliance through pH Correction2021-05-05T19:36:53+00:00

Rental Unit Boosts Treatment Power for Steel Manufacturer

A prominent steel coke manufacturer in Detroit reached out to JNE Environmental for assistance. Their dissolved air treatment system was not capable of floating their sludge waste and was performing well below acceptable standards. JNE proposed a new, properly engineered recycled air stream (RAS) system to deliver sufficient dissolved air into their chemically treated waste stream.

Rental Unit Boosts Treatment Power for Steel Manufacturer2021-05-05T19:39:14+00:00

The JNE Group’s COVID-19 Update

The rapid pace of change of the news regarding COVID-19 (novel coronavirus) continues to drive uncertainty, but we want to assure all our clients and suppliers that The JNE Group of Companies is fully operational as allowed by federal recommendation and continuing to focus on Engineering Success for your project.

The JNE Group’s COVID-19 Update2021-01-21T21:00:03+00:00

JNE Celebrates International Women’s Day 2020

The JNE Group of Companies celebrated International Women’s Day across all divisions and locations on Friday, March 6, 2020.  We asked our female coworkers their thoughts on celebrating this day, what it means to them, and how we can continue to take steps towards gender equality in the workplace.

JNE Celebrates International Women’s Day 20202020-03-30T20:07:13+00:00

Advance Steel Academy — JNE to present at Graitec’s annual event

JNE will be presenting at Graitec’s Advance Steel Academy in Atlanta, Georgia in April 2020. The annual event, beginning in 2015, is a crash course in Autodesk Advance Steel software for both amateurs and experts from across North America.

Advance Steel Academy — JNE to present at Graitec’s annual event2020-03-30T19:59:06+00:00
Go to Top