News
Deep-Fried Wastewater Treatment
A potato chip manufacturer in the Toronto area approached JNE Environmental to tackle a problem with their oily wastewater. The wastewater from their production lines was packed with starches, fats, oil, and grease; all emulsified with cleaners. This creates a particularly difficult concoction for treatment systems to treat the wastewater to sewer compliance.
Custom Formulations to Maximize Solids Separation
A company that processes and digests food wastes was not able to remove enough solids from their incoming slurry prior to entering a large centrifuge. Â This resulted in process instability in their anaerobic digester system. Â JNE has since tested a new dry polymer product tailored to the separation of high solids wastewater for anaerobic digesters.
Pilot Plant Produces Excellent Wastewater Treatment at Local Beef Abattoir
JNE installed a pilot plant at a beef abattoir to evaluate the treatment effectiveness and projected operating costs by treating actual wastewater streams generated from the plant. The tremendous performance of the pilot plant confirmed to the client that a DAF based system is the most cost effective solution for their facility.
Cost-Effective Polymer Make Down and Preparation Unit
JNE Environmental has developed a very cost effective dry polymer make down and preparation unit. This system is fully automatic and can prepare 1,000 litres of properly mixed and aged polymer every 2.5 hours with an accuracy of +/- 0.0002% by weight.
